USED HARDINGE MODEL VMC800II VERTICAL MACHINING CENTER WITH FANUC OM-D CONTROL, 30″ X 20″ X 20″

STOCK# HB-19725

S/N EN6NVB-317 | NEW 2000

SPECIFICATIONS

TRAVELS

  • X-AXIS: 31.50”
  • Y-AXIS: 20.08”
  • Z-AXIS: 20.08”
  • GAGE LINE HEIGHT (MIN-MAX): 6.1 TO 26.1”
  • Y-AXIS THROAT DISTANCE: 23”

TABLE

  • Y WIDTH: 20.00”
  • X LENGTH: 36.40”
  • LOAD CAPACITY: 1,540 LBS
  • T-SLOTS (# & SIZE): .708” X 3 X 6.3”

SPINDLE

  • TAPER: 40
  • SPEED RANGE: 8,000 RPM
  • TRANSMISSION: BELTED
  • HORSEPOWER CONTINUOUS /
  • PEAK / BASE SPEED: 10 /15 / 2000
  • MAXIMUM TORQUE AT BASE SPEED: 39 FT-LB
  • BEARING LUBRICATION: GREASE
  • NON-CONTACT MAGNETIC /
  • ENCODER (NO MOVING PARTS): YES
  • AIR BLAST: YES

AUTOMATIC TOOL CHANGER

  • TYPE: CAROUSEL
  • TOOL TYPE: ANSI / CAT-V
  • PULL STUD TYPE: ANSI/ CAT
  • TOOL SELECTION: BI-DIRECTIONAL
  • ALL ELECTRIC CAM DRIVEN ATC: YES
  • TOOL CAPACITY: 20
  • MAXIMUM TOOL DIA. (FULL DRUM): 3.5”
  • MAXIMUM TOOL DIA. (ADJACENT POCKETS EMPTY): 6”
  • MAXIMUM TOOL LENGTH: 9.84”
  • MAXIMUM TOOL WEIGHT: 13.2 LBS
  • TOOL TO TOOL: 3 SECONDS
  • CHIP TO CHIP: 6.4 SECONDS

AXES DRIVES

  • SERVO MOTORS X, Y, Z: 1.9 HP
  • CONTINUOUS THRUST RATING
  • ALL AXES (POUNDS): 750
  • MAXIMUM THRUST RATING ALL
  • AXES (POUNDS): 1000

BALL SCREWS

  • BALL SCREW SIZE /SUPPORT: FIXED PRETENSION
  • X-AXIS: 32 MM
  • Y-AXIS: 32 MM
  • Z-AXIS: 32 MM
  • BALL SCREW PITCH: 10 MM

LINEAR GUIDEWAY

  • TYPE: LINEAR BALL
  • WAY SIZE: #30
  • LINEAR WAYS X-AXIS: 3
  • LINEAR WAYS Y-AXIS: 3
  • LINEAR WAYS Z-AXIS: 2
  • LINEAR GUIDE TRUCKS X-AXIS: 5
  • LINEAR GUIDE TRUCKS Y-AXIS: 5
  • LINEAR GUIDE TRUCKS Z-AXIS: 6
  • LUBRICATION: MANUAL GREASE
  • COUNTERBALANCED Z-AXIS: MECHANICAL
  • Z-AXIS INTEGRAL BRAKE: STANDARD

X, Y AND Z-AXIS RAPID

  • TRAVERSE RATE (IN/MIN): 1181
  • X, Y AND Z MAXIMUM
  • FEEDRATE (IN/MIN): 472

GENERAL

  • MACHINE OVERALL LENGTH: 116.34” LR X 85.35 FB X 101.42” H
  • MACHINE WEIGHT: 9,854 LBS
  • COOLANT FLOW CAPACITY: 39.8 GALLONS
  • COOLANT FLOW RATE: 13.1 GPM
  • CHIP REMOVAL: PULL OUT BASKETS
  • AIR REQUIREMENTS: 70 PSI / 5 SCFM
  • ELECTRICS: 220 VOLTS, 3 PH, 60 CYC

STANDARD FEATURES

  • RIGID TAPPING
  • POCKET MILLING
  • SIDE ACCESS DOOR W/ WINDOWS
  • 4TH AXIS PRE-WIRING
  • WORK LIGHT
  • AIR HOSE W/ AIR GUN
  • (5) SPARE M-CODES
  • MPG HAND WHEEL
  • SURROUND TOOL COOLANT
  • TOOL KIT

EQUIPPED WITH

  • FANUC OM-D CONTROL
  • RIGID TAP
  • COOLANT FLUSH
  • 4TH AXIS PREWIRE

PRICE $ 27,500.00