NEW MARVEL SERIES 8 MARK II UNIVERSAL VERTICAL BANDSAW, 18″ X 22″

STOCK# NW-20802

S/N WILL ADVISE

Request a Quote

SPECIFICATIONS

  • CAPACITY AT 90°: 18” X 22”
  • CAPACITY AT 45°: 18” X 12.75
  • TABLE HEIGHT: 34.5”
  • TILT: 0 TO 45°LEFT AND RIGHT
  • DRIVE MOTOR: 5 HP
  • BLADE SIZE: 14’6” X 1” X .035”
  • BLADE SPEED RANGE: 50 – 450 FPM
  • FEED PRESSURE: 0 – 140 LBS
  • WORK AREA: 24.25” X 33”
  • QUICK ACTION VISE: MAXIMUM OPENING 20”
  • JAWS: 6” HIGH, 12”WIDE

 GENERAL

  • OVERALL DIMENSIONS: 90″ L X 79″ W X 84-1/2″ H
  • DOMESTIC SHIPPING WEIGHT: 2,870 LBS
  • ELECTRICS: 230 VOLTS, 3 PH, 60 CYC

FEATURES

  • FRONT MOUNTED SPEED CONTROL ALLOWS BLADE SPEED TO BE ADJUSTED FROM OPERATOR’S CONTROL STATION.
  • SPEED RANGE:  50 – 450 FPM (15 – 137 M/MIN) INFINITELY VARIABLE SPEED DRIVE SYSTEM.
  • FEED RANGE:  0 – 140 LBS. INFINITELY VARIABLE DIRECT READING SCALE BALANCE BEAM.
  • T-SLOTTED WORK TABLE:  WORK AREA 24.25″ X 33″; TABLE HEIGHT 34.5″ FOUR MACHINED T-SLOT ACCEPT .625″ T-BOLTS
  • MITER CUTTING:  COLUMN AND BLADE TILT UP TO 45 DEGREES RIGHT AND LEFT OF VERTICAL; WORK ALWAYS STATIONARY.  BUILT-IN PROTRACTOR.
  • QUICK-ACTION VISE:  MAXIMUM OPENING 20″.  JAWS CAN BE SHIFTED TO EITHER RIGHT OR LEFT SIDE OF BLADE.  JAWS ARE 6″ HIGH, 12″ WIDE.
  • AUTOMATIC STOPS:  ADJUSTABLE STOPS CAN BE PRE-SET TO STOP ADVANCE AND RETURN OF BLADE, AND ALSO TO STOP MOTOR AT ANY LOCATION WITHIN THE 18″ TRAVEL OF THE BLADE.
  • COOLANT SYSTEM:  BUILT-IN AVAILABLE WITH EITHER FLOOD, OR ECO DROP SYSTEM.  CONTROLLED BY ON-OFF SELECTOR SWITCH AT OPERATOR’S STATION.  TANK CAPACITY 21 GALLONS.
  • FLUSHING HOSE:  WASHES CHIPS FROM HARD TO GET AT PLACES REDUCING CLEAN-UP TIME.
  • POWER CHIP BRUSH:  TOGETHER WITH BLADE WIPERS AND FLOOD COOLANT
  • KEEP BLADE TEETH FREE OF CHIPS.
  • CARBIDE GUIDE SYSTEM:  GUIDES ARE STATIONARY AND CAN BE RADIALLY
  • ADJUSTED TO PRESENT NEW GUIDING SURFACE TO THE BLADE.  UPPER AND LOWER GUIDES HAVE PRELOADED CARBIDE FACED BACK-UP BLOCKS TO SUPPORT BACK EDGE OF BLADE.
  • MOTORS: MAIN:  5 HP, 1800 RPM, TOTALLY ENCLOSED FAN COOLED.
  • COOLANT PUMP:  1/8 HP, 3600 RPM, TOTALLY ENCLOSED MOTOR BUILT-IN INTEGRALLY
  • CONTROLS:  IEC FUSED DISCONNECT SWITCH AND MAGNETIC MOTOR STARTERS, WITH OVERLOAD AND LOW-VOLTAGE PROTECTION.
  • TRANSFORMER PROVIDES LOW VOLTAGE CONTROL (120 VOLTS) TO ALL PUSH BUTTONS AT OPERATOR’S CONTROL PANEL AND MACHINE LIGHTING CIRCUITS.  CONTROL APPARATUS MOUNTED IN MOISTURE PROOF NEMA 12 COMPARTMENT.

PRICE $ 22,750.00

INCOMING FREIGHT TO ACTION $      WILL ADVISE