USED MORI SEIKI MODEL NT-100/WZ 7-AXIS MILL/TURN CENTER WITH MSX-711IV CONTROL, 2.05” BAR CAPACITY

STOCK# TK-20832

S/N NT-1000II018 | NEW 2009

Request a Quote

SPECIFICATIONS

CAPACITIES

  • MAXIMUM WORKPIECE SWING: 14.57”
  • SWING OVER CROSS SLIDE: 14.57”
  • SWING OVER CROSS SLIDE (TURRET 2): 11.81”
  • MAX TURNING DIAMETER (TOOL-SPINDLE): 14.57”
  • MAX TURNING DIAMETER (TOOL-SPINDLE/TURRET 2): 10.63”
  • MAX TURNING LENGTH:  16.69”
  • BAR WORK CAPACITY: 2.05”

TRAVELS

  • X1-AXIS (TOOL-SPINDLE): 14.96”
  • Y-AXIS (TOOL-SPINDLE): + 4.13”
  • Z1-AXIS (TOOL-SPINDLE): 18.11” + 6.10” (ATC TRAVEL)
  • B-AXIS (TOOL-SPINDLE): + 120 DEGREES
  • X2-AXIS (TURRET 2): 6.10”
  • Z2-AXIS (TURRET 2): 24.01”
  • C-AXIS: .001 DEGREES

SPINDLE

  • SPEED: 6,000 RPM
  • NUMBER OF SPINDLE SPEED RANGE (STEP): 2 <WOUND ROTOR>
  • SPINDLE NOSE TYPE: JIS A2-5
  • THROUGH-SPINDLE HOLE DIAMETER: 2.4”
  • MINIMUM SPINDLE INDEXING ANGLE: 0.0001 DEGREES
  • SPINDLE BEARING INSIDE DIAMETER: 3.94”

TOOL-SPINDLE (TURRET ONE)

  • NUMBER OF TOOLS ON HEAD: 1
  • MINIMUM B-AXIS INDEXING ANGLE: 0.0001 DEGREES
  • TOOL SPINDLE SPEED: 20,000 RPM
  • SPINDLE SPEED (STEP ONE): 1,800 – 5,000 RPM
  • SPINDLE SPEED (STEP TWO): 5,000 – 18,000 RPM
  • SPINDLE SPEED (STEP ONE): 18,000 – 20,000 RPM
  • TAPER HOLE OF TOOL-SPINDLE: HSK-A50/C6
  • INSIDE DIAMETER OF TOOL-SPINDLE BEARING: 2.56”
  • TOOL MAGAZINE: 38 POSITIONS
  • MAXIMUM TOOL DIAMETER: 2.76”
  • MAXIMUM TOOL DIAMETER (NO ADJACENT TOOLS): 5.12”
  • MAXIMUM TOOL MASS: 11 LBS

TURRET 2

  • NUMBER OF TOOLS: 8
  • SQUARE SHANK HEIGHT OF SINGLE POINT TOOL: .79” / 20 MM
  • SHANK DIAMETER OF BORING BAR: 1.26” / 32 MM

MOTORS

  • SPINDLE DRIVE MOTOR (30 MIN/CONT): 15/10 HP
  • TOOL-SPINDLE MOTOR (40%/CONT): 7.5/5 HP (1,800 – 18,000 RPM)
  • TOOL-SPINDLE MOTOR (40%/CONT): 5/3 HP (18,000 – 20,000 RPM)

GENERAL

  • MACHINE DIMENSIONS
  • WEIGHT: 18,700 LBS
  • ELECTRICS

EQUIPPED WITH

  • FANUC MSX-711IV MAPPS-III CONTROL
  • .001 DEGREE FULL CONTOURING (B-AXIS)
  • HYDRAULICS THRU TURRET I/F
  • LOWER TURRET EXTENDED TRAVEL OF 200 MM
  • COOLANT FILTRATION SYSTEM
  • HINGE BELT CHIP CONVEYOR (RIGHT SIDE)
  • RENISHAW PROBE SYSTEM
  • 150 PSI THROUGH SPINDLE COOLANT
  • 5 SETS OF M-CODES
  • PROGRAMMING RESOLUTION BY 1/10
  • MICROCENTRIC CB65 HYDRAULIC CHUCK
  • TAILSTOCK FOR TURRET

PRICE $ 139,900.00

  • SINCE THIS MACHINE IS BEING SOLD ON BEHALF OF A LESSOR AND IS AN
  • OFF-LEASED MACHINE IT IS BEING SOLD “AS IS”.
  • IT IS THE BUYERS RESPONSIBILITY TO CONFIRM THE PRESENCE, FUNCTIONALITY, AND LICENSING REQUIREMENTS OF THE SOFTWARE
  • MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS MACHINE.
  • THERE WILL BE AN ADDITIONAL $2,000 CHARGE FOR MACHINE PREPARATION AND LOADING.