USED MORI SEIKI  MODEL SL-403CMC/2000 CNC LATHE WITH BIG BORE, LIVE TOOLING, C-AXIS, PROGRAMMABLE TAILSTOCK AND FANUC 32iB CONTROL, 7.03” SPINDLE HOLE

STOCK# TK-20926#

S/N SL400141202 | NEW 20015

Request a Quote

SPECIFICATIONS

  • CAPACITIES
  • SWING OVER BED: 36.8”
  • SWING OVER CROSS SLIDE: 29.1”
  • DISTANCE BETWEEN CENTERS: 91.5”
  • MAXIMUM TURNING DIAMETER: 25.5”
  • STANDARD TURNING DIAMETER: 14.7”
  • MAXIMUM TURNING LENGTH: 77.6”

TRAVELS

  • X-AXIS: 13.6”
  • Z-AXIS: 82.7”

SPINDLE

  • MAXIMUM SPINDLE SPEED: 1,500 RPM
  • NUMBER OF SPEED RANGES: 2
  • SPINDLE NOSE: JIS A2-15
  • THROUGH SPINDLE HOLE DIAMETER: 7.3”
  • MAXIMUM SPINDLE INDEXING ANGLE: 0.001°

TURRET

  • NUMBER OF TOOL STATIONS: 12
  • SHANK HEIGHT FOR SQUARE TOOL: 1-1/4”
  • SHANK DIAMETER FOR BORING BAR: 2-1/2”
  • TURRET INDEXING TIME: .04 SECONDS
  • MAXIMUM ROTARY TOOL SPINDLE SPEEDS: 3,000 RPM

FEED RATES

  • RAPID TRAVERSE RATE (X-AXIS): 787.4 IPM
  • RAPID TRAVERSE RATE (Y-AXIS): 944.9 IPM
  • RAPID TRAVERSE RATE (C-AXIS): 56 MIN-¹
  • JOG FEED RATE: 0 – 197 IPM

TAILSTOCK

  • TRAVEL: 78.7”
  • SPINDLE DIAMETER: 5.9”
  • TAPER HOLE OF TAILSTOCK SPINDLE: MT5
  • TAILSTOCK SPINDLE TRAVEL: 5.9”

MOTORS

  • SPINDLE DRIVE MOTOR (30 MIN/CONT): 40/30 HP
  • FEED MOTOR: 8/9.3 HP
  • ROTARY TOOL SPINDLE MOTOR (30 MIN/CONT): 12/10 HP
  • COOLANT PUMP MOTOR: .69 HP

GENERAL

  • FLOOR SPACE: 257.7” X 124.6” X 100.1”
  • WEIGHT (APPROXIMATELY): 33,000 LBS
  • ELECTRICS: 220 VOLT, 3 PH, 60 CYC
  • COOLANT TANK CAPACITY: 87.1 GALLONS

STANDARD FEATURES

  • OIL SPINDLE COOLING SYSTEM
  • 12-STATION BOLT-TIGHTENED TURRET
  • COOLANT SYSTEM
  • MANUAL TYPE IN-MACHINE TOOL PRESETTER
  • BUILT-IN WORK LIGHT
  • LEVELING BLOCKS
  • CHUCK FOOT SWITCH
  • MT5 BUILT-IN TAILSTOCK CENTER

EQUIPPED WITH

  • FANUC F32iB (MAPPS IV) CONTROL
  • HIGH-OUTPUT SPINDLE
  • CHIP BLASTER JV-40 HIGH PRESSURE COOLANT SYSTEM
  • LNS TURBO RIGHT DISCHARGE, HINGE TYPE CHIP CONVEYOR
  • 18” KITAGAWA BB218 LARGE THRU-HOLE (6.55″) POWER CHUCK
  • VARIABLE SPEED THREAD CUTTING
  • THREAD RE-CUTTING
  • LNS AUTOBLOCK K4 1-ZSW AUTOMATIC STEADY REST
  • (4) ROTARY TOOL HOLDERS
  • (1) FACE CUTTING POSITIONING BLOCKS
  • (3) OD CUTTING POSITIONING TOOLS

PRICE $ 450,000.00

  • THIS MACHINE IS ON CONSIGNMENT ANY OFFER IS WELCOME BUT SUBJECT TO CONSIGNEE’S APPROVAL.
  • SINCE THIS MACHINE IS BEING SOLD ON BEHALF OF A LESSOR AND IS AN OFF-LEASED MACHINE IT IS BEING SOLD “AS IS”.
  • MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS MACHINE.
  • THERE WILL BE AN ADDITIONAL CHARGE OF $ 3,500.00 FOR MACHINE PREPARATION AND LOADING.
  • ALL SPECIFICATIONS MUST BE VERIFIED BY THE PURCHASER FOR ACCURACY.